-1.png?width=500&height=271&name=FiberTite_Only%20(500px%20wide)-1.png "FiberTite_Logo")
Quick Links:
/tr
 |
 |
 |
|
|---|---|---|---|
 |
 |
 |
|
 |
 |
 |
|
 |
 |
 |
|
 |
 |
 |
|
 |
 |
 |
Categories:
Assembly Illustrations
• Roof System Cross Section Drawings
System Wind Uplift Design/Layout
• Wind Uplift Zone Layouts
Insulation Attachments
• Details for Mechanically Attached or Adhered Insulation
Lightweight Insulating Concrete
• Assorted Details in case of Lightweight Insulated Concrete Installations
Sheet Layouts
• Attachment Position Details
Wall Conditions
• Flashings and Coping Details at Walls
Edge Conditions
• Flashings and Fascia Details at Edges
Penetrations
• Roof Penetration Flashing Details
Forti-Lock™ Liquid Flashing
• Liquid Applied PMMA Flashing System Details
Expansion Joints and Tie Ins
• Joint Detail Drawings
Miscellaneous
• Walkway, Base Sheets, T Laps, Lightning Protection, Snow Guard
FiberTite VBX™
• VBX Air & Vapor Barrier Installation Details
U-Anchor™ Rooftop Attachments
• U-Anchor™ Installation Details
Induction Welded Roof Systems
• FTR-IW isoweld® Induction Welding Details
FiberTite Blue-Roof™
• Temporary Roof Protection Details
Simulated Metal Roofing (Rib)
• Cross Section and Layouts
FiberTite Hybrid™
• Multi-Ply Cross Sections and Flashing Details for Hybrid Roof Systems
FiberTite GREEN Roof
• Fibertite Vegetated Roof System Details
Assembly Illustrations
| Drawing Title (Drawing #) | Download |
| Composite Roof System Cross Section - Mechanically Fastened System (FTR-DMFS1) | PDF | DWG |
| Concrete Roof System Cross Section - Mechanically Fastened System (FTR-DMFS1a) | PDF | DWG |
| Wood Deck Roof System Cross Section - Mechanically Fastened System (FTR-DMFS1b) | PDF | DWG |
| Composite Roof System Cross Section - Adhered Insulation in Asphalt (FTR-DAS1) | PDF | DWG |
| Composite Roof System Cross Section - Adhered Insulation in FTR-601 adhesive (FTR-DAS2) | PDF | DWG |
| Composite Roof System Cross Section - with Vapor Barrier (FTR-DAS2a) | PDF | DWG |
| Tapered Roof System Cross Section - with Cover Board (FTR-DAS2b) | PDF | DWG |
| Tapered Roof System Cross Section - without Cover Board (FTR-DAS2c) | PDF | DWG |
| Composite Roof System Cross Section - Mechanically Fastened Insulation (FTR-DAS4) | PDF | DWG |
| Composite Roof System Cross Section - Adhered Insulation in FTR-601 Adhesive on Steel Deck (FTR-DAS10) | PDF | DWG |
| Roof System Cross Section - Mechanically Fastened Cover Board and Adhered Insulation with Vapor Barrier (FTR-DAS12SP) | PDF | DWG |
| Roof System Cross Section - Mechanically Fastened and Adhered Insulation with Vapor Barrier (FTR-DAS13SP) | PDF | DWG |
| Roof System Cross Section - Mechanically Fastened Cover Board and Adhered Insulation (FTR-DAS16SP) | PDF | DWG |
| Roof System Cross Section - Mechanically Fastened Cover Board and Adhered Insulation with Vapor Barrier (FTR-DAS17SP) | PDF | DWG |
| Roof System Cross Section - Mechanically Fastened and Adhered Insulation with Vapor Barrier (FTR-DAS18SP) | PDF | DWG |
| Composite Roof System Cross Section - Ballasted System (FTR-DBS1) | PDF | DWG |
System Wind Uplift Design/Layout
| Drawing Title (Drawing #) | Download |
| ASCE 7-16 Zone Layouts - least horizontal dimension greater than 1.2h but less than 2.4h (FTR-ASCE7a) | PDF | DWG |
| ASCE 7-16 Zone Layouts- least horizontal dimension greater than 2.4h (FTR-ASCE7b) | PDF | DWG |
| ASCE 7-16 Zone Layouts- least horizontal dimension less than 1.2h & largest horizontal dimension greater than 1.2h (FTR-ASCE7c) | PDF | DWG |
| ASCE 7-16 Zone Layouts- largest horizontal dimension less than 1.2h (FTR-ASCE7d) | PDF | DWG |
Insulation Attachments
| Drawing Title (Drawing #) | Download |
| Preliminary Insulation Attachment for 1-90 Mechanically Attached FiberTite® System (FTR-DI1) | PDF | DWG |
| Preliminary Attachment - 3/8” Extruded Polystyrene “Cut Fold” Recovery Board (FTR-DI5) | PDF | DWG |
| Adhered System (1-90 attachment) - Mechanically Attached Insulation, 2” Thickness or Greater (FTR-DI2a) | PDF | DWG |
| Adhered System - Mechanically Attached Insulation, thickness less than 1.5” (FTR-DI3) | PDF | DWG |
| Adhered System (1-90 attachment) - Mechanically Attached Insulation, 1.5” to 1.9” thickness (FTR-DI4a) | PDF | DWG |
| Insulation/Coverboard Attachment Pattern (FTR-DI6) | PDF | DWG |
| FTR 601 Insulation Adhesive Application (FTR-D601) | PDF | DWG |
| Class 1-90 or less M/A Insulation & Membrane Adhered - Field, Perimeter, and Corners (FINS-90a) | PDF | DWG |
| Class 1-90 M/A Insulation & Adhered Field Membrane - w/ M/A Membrane in Perimeter and Corners (FINS-90b) | PDF | DWG |
Lightweight Insulating Concrete
| Drawing Title (Drawing #) | Download |
| Concrete Deck with Lightweight Concrete - Cross Section (FTR-LWC1) | PDF | DWG |
| Raised Expansion Joint - Lightweight Concrete (FTR-LWCEJ) | PDF | DWG |
| Roof Drain Flashing - Lightweight Concrete (FTR-LWDF) | PDF | DWG |
| Edge Flashing - Lightweight Concrete (FTR-LWE) | PDF | DWG |
| Field Fabricated Pipe Flashing - Lightweight Concrete (FTR-LWFPF) | PDF | DWG |
| Gutter Edge Flashing - Lightweight Concrete (FTR-LWGE) | PDF | DWG |
| Pre-Molded Pipe Flashing - Lightweight Concrete (FTR-LWPP) | PDF | DWG |
| Parapet Wall Flashing - Lightweight Concrete (FTR-LWPW) | PDF | DWG |
| Raised Edge Flashing - Lightweight Concrete (FTR-LWRE) | PDF | DWG |
| Metal Deck with Lightweight Concrete - Cross Section (FTR-LWS1) | PDF | DWG |
| Scupper Drain Flashing - Lightweight Concrete (FTR-LWSD) | PDF | DWG |
Sheet Layouts
| Drawing Title (Drawing #) | Download |
| FTR Magnum Plates and Fasteners - Lap Style and Position (FTR-DLAPa) | PDF | DWG |
| FTR Magnum Plus Plates and Magnum Fasteners - Lap/Placement (FTR-DLAP4) | PDF | DWG |
| FTR Magnum-2S Plates and Fasteners - Lap/Placement (FTR-DLAP3) | PDF | DWG |
| Class 1-75 or Less - General Perimeter and Corner Layout (FGL-75) | PDF | DWG |
| Class 1-90 or Greater - General Perimeter and Corner Layout (FGL-90) | PDF | DWG |
| Class 1-90 Attachment - 74” Rolls w/ 37” Perimeter Sheets (F74-RG90a) | PDF | DWG |
| Class 1-90 Attachment - 74” Rolls w/ Strip in Perimeter (F74-RG90b) | PDF | DWG |
| Class 1-120 Attachment - 74” Rolls w/ 37” Perimeter Sheets (F74-RG120a) | PDF | DWG |
| Class 1-120 Attachment - 74” Rolls w/ Strip in Perimeter (F74-RG120b) | PDF | DWG |
| Standard Panels with Tabs - 74” Stock (F74-SP1) | PDF | DWG |
| Class 1-90 Attachment - 100” Rolls w/ 50” Perimeter Rolls (F100-RG90a) | PDF | DWG |
| Class 1-90 Attachment - 100” Rolls w/ Cover Strip Perimeter (F100-RG90b) | PDF | DWG |
| Class 1-105 Attachment - 100” Rolls w/ 50” Perimeter Rolls (F100-105a) | PDF | DWG |
| Class 1-105 Attachment - 100” Rolls w/ Cover Strip Perimeter (F100-105b) | PDF | DWG |
| Roof System Attachment at Slope Transition and Change in Plane (FTR-ST1) |
PDF | DWG |
| Roof System Attachment at Slope Transition and Change in Plane - membrane lap alternative (FTR-ST2) | PDF | DWG |
Wall Conditions
| Drawing Title (Drawing #) | Download |
| Typical “Membrane” Wall Flashing - Horizontal Blocking w/ Sawcut Reglet (FTR-DW1) | PDF | DWG |
| Wall Flashing - (Blocking Alternate 1) T-Bar Restraint (FTR-DW1a) | PDF | DWG |
| Wall Flashing - (Blocking Alternate 2) T-Bar Restraint (FTR-DW1b) | PDF | DWG |
| Wall Flashing - (Blocking Alternate ) Plate & Fastener Base Restraint (FTR-DW1c) | PDF | DWG |
| Typical “Clad” Metal Wall Flashing - Horizontal Blocking w/ Sawcut Reglet (FTR-DW2) | PDF | DWG |
| Typical “Clad” Metal Wall Flashing (FTR-DW2i) | PDF | DWG |
| Wall Flashing - Alternate “Base” Securement (FTR-DW3) | PDF | DWG |
| Wall Flashing - Alternate “Base” Securement - Standard Wind Warranty (FTR-DW3a) | PDF | DWG |
| Wall Flashing - Alternate Termination’s (FTR-DW4) | PDF | DWG |
| Wall Flashing - w/ Metal Cap Flashing (FTR-DW5) | PDF | DWG |
| FiberTite Premanufactured Coping System - Tapered and Non Tapered (FTR-DW5a) | PDF | DWG |
| Wall Flashing - Non Removable Coping Cap (FTR-DW5b) | PDF | DWG |
| Wall Flashing - w/ Metal Cap Flashing (FTR-DW5c) | PDF | DWG |
| Wall Flashing - w/ Metal Cap Flashing (FTR-DW5d) | PDF | DWG |
| Alternate Coping/Flashing (FTR-DW6) | PDF | DWG |
| Wall Flashing/Intermediate Attachment (FTR-DW7) | PDF | DWG |
| Architectural Metal Coping Tilt Wall Construction W/O Wood Nailer (FTR-DCTW1) | PDF | DWG |
Edge Conditions
| Drawing Title (Drawing #) | Download |
| Typical Edge Flashing (FTR-DE1) | PDF | DWG |
| 2-Piece Shop Fabricated Metal Edge Flashing (FTR-DE2) | PDF | DWG |
| Gutter Flashing (FTR-DE3) | PDF | DWG |
| FiberTite at Fascia System - Standard Fascia Edge (FTR-DE4 | PDF | DWG |
| FiberTite at Fascia System - Large Fascia Edge (FTR-DE4a) | PDF | DWG |
| FiberTite at Fascia System - Raised Canted Edge (FTR-DE5) | PDF | DWG |
| FiberClad Metal “Gravel Stop” Flashing - Ballast Roofing System(s) (FTR-DE6) | PDF | DWG |
| Gutter Flashing - Ballast Roofing System(s) (FTR-DE7) | PDF | DWG |
| Architectural Metal Fascia w/ FiberClad Metal Cleat (FTR-DE8) | PDF | DWG |
| FiberTite 200 Fascia System - Raised Cleat Edge (FTR-DE8a) | PDF | DWG |
Penetrations
| Drawing Title (Drawing #) | Download |
| Typical Wood Curb or Skylight Flashing (FTR-DP1) | PDF | DWG |
| Typical Wood Curb or Skylight Flashing (isometric view) (FTR-DP1i) | PDF | DWG |
| Typical Wood or Skylight Curb Flashing - (Blocking Alternate) T-Bar Restraint (FTR-DP1a) | PDF | DWG |
| Typical Wood or Skylight Curb Flashing - (Blocking Alternate) T-Bar Restraint (isometric view) (FTR-DP1ai) | PDF | DWG |
| Wood Curb or Skylight Flashing - (Blocking Alternate) T-Bar Restraint (FTR-DP1b) | PDF | DWG |
| Wood Curb or Skylight Flashing - (Blocking Alternate) T-Bar Restraint (isometric view) (FTR-DP1bi) | PDF | DWG |
| Metal Curb w/ T-Bar Restraint (FTR-Dp1c) | PDF | DWG |
| Metal Curb w/ Magnum Plate Restraint (FTR-Dp1d) | PDF | DWG |
| Insulated Curb or Fire Hatch (FTR-DP2) | PDF | DWG |
| Insulated Curb/ Fire Hatch - Metal Counter Flashing (FTR-DP2a) | PDF | DWG |
| Roof Access Hatch w/ Backer Rod (FTR-DP2b) | PDF | DWG |
| Pre-Molded Pipe Flashing (FTR-DP3) | PDF | DWG |
| Pre-Molded Pipe Flashing (isometric view) (FTR-DP3i) | PDF | DWG |
| Field Fabricated Pipe Flashing (FTR-DP4) | PDF | DWG |
| Field Fabricated Pipe Flashing (isometric view) (FTR-DP4i) | PDF | DWG |
| Pitch Pan Flashing (see FTR specifications for conditions on use) (FTR-DP5) | PDF | DWG |
| Pitch Pan Flashing (isometric view) (see FTR specifications for conditions on use) (FTR-DP5i) | PDF | DWG |
| Roof Top Stanchion (FTR-DP6) | PDF | DWG |
| Heated Stack Flashing - w/ Metal Collar (FTR-DP7) | PDF | DWG |
| Heated Stack Flashing - w/ Metal Collar (isometric view) (FTR-DP7i) | PDF | DWG |
| Pre-Formed Pipe Flashing - Alternate Base Restraint (FTR-DP8) | PDF | DWG |
| Pre-Formed Pipe Flashing - Alternate Base Restraint (isometric view) (FTR-DP8i) | PDF | DWG |
| Field Fabricated I-Beam Flashing (isometric view) (FTR-DP9i) | PDF | DWG |
| Field Fabricated Square Tube Flashing (isometric view) (FTR-DP10i) | PDF | DWG |
| Field Fabricated Square Angle Iron Flashing (isometric view) (FTR-DP11i) | PDF | DWG |
| Pre-Molded "Wrapid Flash" Pipe Penetration Flashing (FTR-DP12) | PDF | DWG |
| Pipe Penetration - Metal Hood Flashing (FTR-DP13i) | PDF | DWG |
| Typical Drain Flashing (FTR-DD1) | PDF | DWG |
| Typical Scupper Flashing (FTR-DD2) | PDF | DWG |
| Typical Drain Flashing – w/ Fleeceback or Reinforced Membrane (FTR-DD3) | PDF | DWG |
| Typical Reinforced Drain Flashing (FTR-DD4) | PDF | DWG |
Forti-Lock™ Liquid Flashing
| Drawing Title (Drawing #) | Download |
| FTR Forti-Lock™ Liquid Applied PMMA Angle Penetration Flashing (FTR-FL1) | PDF | DWG |
| FTR Forti-Lock™ Liquid Applied PMMA I-Beam Penetration Flashing (FTR-FL2) | PDF | DWG |
| FTR Forti-Lock™ Liquid Applied PMMA C-Channel Penetration Flashing (FTR-FL3) | PDF | DWG |
| FTR Forti-Lock™ PMMA "I" Beam Fleece Pattern (FTR-FL4) | PDF | DWG |
| FTR Forti-Lock™ PMMA Angle Support (FTR-FL5) | PDF | DWG |
| Square Tube/Column Flashing Terminated w/ Forti-Lock™ PMMA Flashing System (FTR-FL6) | PDF | DWG |
Expansion Joints and Tie Ins
| Drawing Title (Drawing #) | Download |
| ”Low Profile” Expansion Joint (FTR-DX1) | PDF | DWG |
| Raised Expansion Joint - Over Wood Blocking (FTR-DX2) | PDF | DWG |
| Raised Expansion Joint - Over Insulation (FTR-DX2a) | PDF | DWG |
| Raised Expansion Joint - Over Insulation (Ballast System) (FTR-DX2b) | PDF | DWG |
| Horizontal to Vertical Expansion Joint (FTR-DX3) | PDF | DWG |
| Alternate Horizontal to Vertical Expansion Joint (FTR-DX3a) | PDF | DWG |
| Flashing “Tie In” - to Existing Roof System(s) (FTR-DT1) | PDF | DWG |
| FiberClad Metal Flashing “Tie In” - to Existing Roof System(s) (FTR-DT2) | PDF | DWG |
| Temporary (1 to 2 Years) “Tie In” - to Existing Roof System(s) (FTR-DT3) | PDF | DWG |
| Temporary “over Night Seal” - to Existing Roof System(s) (FTR-DT4) | PDF | DWG |
| FiberClad Metal Flashing “Tie In” - to Shingle Roof System(s) (FTR-DT5) | PDF | DWG |
| Membrane Flashing “Tie In” - to Shingle Roof System(s) (FTR-DT6) | PDF | DWG |
Miscellaneous
| Drawing Title (Drawing #) | Download |
| FTR KEE Yellow TuffTrac Walkway (FTR-DM1c) | PDF | DWG |
| FTR Crossgrip Walkway - Low Wind Area (FTR-DM1d) | PDF | DWG |
| FTR Crossgrip Walkway w/ Strapping - High Wind Area (FTR-DM1e) | PDF | DWG |
| General Base Sheet Attachment (FTR-DM2) | PDF | DWG |
| Lightning Protection - adhered base + heat welded strips (FTR-DM3) | PDF | DWG |
| Lightning Protection - adhered base + adhered clips (FTR-DM3a) | PDF | DWG |
| Lightning Rod Edge Bracket - Style 1 (FTR-LRB1) | PDF | DWG |
| Lightning Rod Edge Bracket - Style 2 (FTR-LRB2) | PDF | DWG |
| Lightning Rod Edge Bracket - Style 3 (FTR-LRB3) | PDF | DWG |
| Typical Cover at Membrane T-Laps (T-Joint Cover) (FTR-TLAP) | PDF | DWG |
| Snow Guard - New Construction (FTR-SGNC) | PDF | DWG |
| Snow Guard - Retrofit (FTR-SGRF) | PDF | DWG |
FiberTite VBX™ Air &Vapor Barrier
| Drawing Title (Drawing #) | Download |
| FiberTite VBX Membrane Cross Section - Mechanically Fastened System (FTR-VBX1) | PDF | DWG |
| FiberTite VBX Membrane Cross Section - Minimal Slope Drain Flashing (FTR-VBX2) | PDF | DWG |
| FiberTite VBX Membrane Cross Section - Low Profile Expansion Joint (FTR-VBX3) | PDF | DWG |
| FiberTite VBX Membrane - Roof Edge (FTR-VBX5) | PDF | DWG |
| FiberTite VBX Membrane - Pre-Molded Pipe Flashing (FTR-VBX6) | PDF | DWG |
| FiberTite VBX Membrane - End Laps (FTR-VBX7) | PDF | DWG |
U-Anchor™ Rooftop Attachments
| Drawing Title (Drawing #) | Download |
| Mechanically Attached U1400-FTR (FTR-U1400) | PDF | DWG |
| Mechanically Attached U2400-FTR (FTR-U2400) | PDF | DWG |
| Mechanically Attached U3400-FTR (FTR-U3400) | PDF | DWG |
| Mechanically Attached U3400S-FTR (FTR-U3400S) | PDF | DWG |
Induction Welded FiberTite® Systems
| Drawing Title (Drawing #) | Download |
| FTR Induction Weld Plate and FTR Fastener - Proper Installation (FTR-IWS1) | PDF | DWG |
| Induction Weld Attachment Methods - Class Rating 1-90 (FTR-IWIA1A) | PDF | DWG |
| Induction Weld Field, Perimeter, and Corner - Attachment Designations (FTR-IWIA2) | PDF | DWG |
| Composite Roof Cross Section - Induction Welded System (FTR-IWMF1) | PDF | DWG |
| Mechanically Fastened Induction Welded System - Over Metal Retrofit (FTR-IWMR1) | PDF | DWG |
| Induction Weld Plate Attachment - Layout on Metal Retrofit (FTR-IWMR3) | PDF | DWG |
| Insulation Attachment - for Metal Retrofit (FTR-MR2) | PDF | DWG |
FiberTite® Blue Roof™
| Drawing Title (Drawing #) | Download |
| FTR Blue Roof Temporary Roof (Horizontal Tape Laps) (FTR-TR2) | |
| FTR Blue Roof Temporary Roof (Horizontal Tape Laps) (FTR-TR3) | |
| FTR Blue Roof Temporary Roof (Vertical Surfaces) (FTR-TR4) | |
| FTR Blue Roof Temporary Roof (Roof Edge) (FTR-TR5) | |
| FTR Blue Roof Temporary Roof (Pipe Penetration) (FTR-TR6) | |
| FTR Blue Roof Temporary Roof (Base Termination at Penetrations/Walls) (FTR-TR7) | |
| FTR Blue Roof Temporary Roof (Horizontal Adhesive Laps) (FTR-TR8) | |
| FTR Blue Roof Temporary Roof (Horizontal Tape Laps) (FTR-TR9) | |
| FTR Blue Roof Temporary Roof (Roof Edge) (FTR-TR11) | |
| FTR Blue Roof Temporary Roof (Base Termination at Penetrations/Walls) (FTR-TR12) |
Simulated Metal Roofing
| Drawing Title (Drawing #) | Download |
| Composite Roof Cross Section - Simulated Metal Roofing Profile (FTR-SMRP) | PDF | DWG |
| Ridge and Valley Flashing - Simulated Metal Roofing Profile (FTR-SMRP1) | PDF | DWG |
| Simulated Metal Rib Profile Splice - Simulated Metal Rib Profile (FTR-SMRP2) | PDF | DWG |
FiberTite® Hybrid™
| Drawing Title (Drawing #) | Download |
| Multi-Ply Roof System Cross Section - Adhered Insulation in Asphalt (FTR-DAS1MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Adhered Insulation in FTR-601 Adhesive w/ SBS Base (FTR-DAS2MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Adhered Insulation in FTR-601 Adhesive (FTR-DAS3MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Adhered Membrane and Insulation in Asphalt - with Adhered Cover Board in Asphalt (FTR-DAS4MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Adhered Membrane and Insulation in Asphalt w/ SBS Base (FTR-DAS5MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Adhered Membrane and Insulation in FTR-601 Adhesive w/ SBS Base (FTR-DAS6MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Adhered Membrane and Insulation in FTR-601 Adhesive (FTR-DAS7MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Adhered Membrane and Insulation in Asphalt (FTR-DAS8MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Mechanically Fastened Insulation (FTR-DAS9MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Mechanically Fastened Cover Board and Adhered Insulation with Vapor Barrier (FTR-DAS10MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Mechanically Fastened and Adhered Insulation with Vapor Barrier (FTR-DAS11MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Mechanically Fastened Cover Board and Adhered Insulation (FTR-DAS14MP) | PDF | DWG |
| Multi-Ply Roof System Cross Section - Mechanically Fastened and Adhered Insulation (FTR-DAS15MP) | PDF | DWG |
| Typical Multi-Ply Pipe Flashing (FTR-DP3MP) | PDF | DWG |
| Typical Multi-Ply Scupper Flashing (FTR-DD2MP) | PDF | DWG |
| Typical Multi-Ply Curb Base Termination - T-Bar Restraint (FTR-DCB1MP) | PDF | DWG |
| Typical Multi-Ply Wall Base Termination - T-Bar Restraint (FTR-DWB1MP) | PDF | DWG |
| Typical Multi-Ply Wall Base Termination - T-Bar Restraint (to FTR Fleeceback)(FTR-DWB2MP) | PDF | DWG |
| Typical Multi-Ply Drain Flashing (FTR-DD3MP) | PDF | DWG |
| Typical Multi-Ply Field Fabricated Pipe Flashing (FTR-DP4MP) | PDF | DWG |
FiberTite® Green
| Drawing Title (Drawing #) | Download |
| FiberTite Green Vegetated Roof System - Ballast Rock at Drain w/ Edger (FTG-DAED1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - 4.5” Aluminum Edger at Multilayer (FTG-DAEM1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Ballast Rock at Wall w/ Edger (FTG-DAEW1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Extensive Multilayer System (FTG-DEML1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Standard Multilayer System (FTG-DSML1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Standard Multilayer System w/ Vector Mapping Mesh (FTG-DSML2) | PDF | DWG |
| FiberTite Green Vegetated Roof System - FTGVRS Tray System w/ Ballast Rock at Penetration (FTG-DTBP1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - FTGVRS Tray System w/ Ballast Rock Walkway (FTG-DTBW1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - FTGVRS Tray System w/ Concrete Paver Walkway (FTG-DTPW1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Typical FTGVRS Tray System (FTG-DTRAY1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Typical FTGVRS Tray Connection (FTG-DTRAY3) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Typical FTGVRS Tray Layout (Ballast) (FTG-DTRAY-A) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Typical FTGVRS Tray Layout (Pavers) (FTG-DTRAY-B) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Metal Edger and Wall Flashing Profiles (FTG-DTREFL1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Irrigation System Layout - Tubing (FTG-DTRIR1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Irrigation System Layout - Controls (FTG-DTRIR2) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Irrigation Connection to Tray (FTG-DTRIR3) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Irrigation Value Box (FTG-DTRIR4) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Irrigation Header (FTG-DTRIR5) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Tray System at Wall (FTG-DTRW1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Tray System w/ Ballast Rock at Wall (FTG-DTRW2) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Ballast Rock at Drain w/ FTVGRS Tray (FTG-DTSD1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Ballast Rock at Wall Termination w/ Vector Mapping Mesh (FTG-DVMW1) | PDF | DWG |
| FiberTite Green Vegetated Roof System - Wall Termination w/ Vector Mapping Mesh (FTG-DVMW2) | PDF | DWG |
-1.png?width=263&height=142&name=FiberTite_Only%20(500px%20wide)-1.png)